|
Authentication
Settings:
The Authentication
Settings window displays when Authentication Settings is selected
from the Authentication menu in the navigation panel. This window is
used for entering or modifying general settings for the ProxyBlocker that
will enable this server to authenticate and re-authenticate users
on the network. If using an NT domain, this window also is used
for creating an account that will give this server full access rights
within the domain on which it resides (see Join
Domain).
Settings frame
When authentication in enabled—via the Enable/Disable Authentication
window—the fields in this frame are activated.
The
ProxyBlocker NetBIOS Name displays. This is the Host Name entered in the
LAN Settings window.
1. If using a WINS server for name resolution, in the IP Address
of WINS Server field, enter the IP address of each Windows DNS server
to be filtered by this ProxyBlocker, with a space between each IP address.
2. In the Virtual IP Address to Use for Authentication field, 1.2.3.5
displays by default. Enter the IP address that from now on will
be used for communicating authentication information between the
ProxyBlocker and the PDC. This must be an IP address that is not being
used, and is on the same segment of the network as the ProxyBlocker.
WARNING: If the IP address entered here is not in the same subnet
as this ProxyBlocker, the net use connection will fail.
3. In the NIC Device to Use for Authentication pull-down menu, LAN2
would usually be selected for sending traffic on the network—in
particular, for transferring authentication data.
4. Click Apply to apply your settings.
Entries should be made in the NT
Authentication Server Details frame only if the domain is an
NT domain.
Related
Topics:
Back
| Top
|
