M86 AD Agent: Configuration > ProxyBlocker Transmissions Configuration

To configure the primary Agent to send data to the M86 ProxyBlocker:

1. In the Configuration window, click Appliance to display the Appliance page. By default, the fields in this page are populated with entries made during the configuration wizard setup process.
   
   If necessary, changes can be made to any of these fields for the primary host:

• Enable transmissions to this appliance - Click this checkbox to enable the AD Agent configured on the current machine to send information to the ProxyBlocker specified in this page.
• Appliance address - Enter the IP address of the ProxyBlocker that will receive AD Agent logon/logoff event information.
• Port - By default, “26267” displays for the ProxyBlocker’s port. This port number should only be changed if the ProxyBlocker is using a different port number.
• Appliance passphrase - Enter the passphrase that was entered in the Passphrase field in the AD Agent Settings pop-up window (accessible via the Enable/Disable Authentication window).
• (Repeat passphrase) - Re-enter the passphrase entered in the previous field.
• Descriptive name - By default “Filter #1” displays. A descriptive name for the ProxyBlocker can be entered in this field.

2. If necessary, click the following objects to perform the specified actions:

• “Enable transmissions to this appliance” - De-select this option if the ProxyBlocker should not be receiving data from the primary host.
• Resend all data - Click this button to resend the entire session table from the primary host to the ProxyBlocker.

  TIP: View the Activity log for transmission results.

Related Topics:

• Agent Configuration
• ProxyBlocker Setup

Back | Top